![]() |
MCM-8S22A is a 10G Ethernet media converter, supporting FTTx, CWDM, and carrier Ethernet. |
MCM series are complete and versatile solutions for the applications such as FTTx, CWDM, and carrier Ethernet. By the diversified speeds of 1,000Mbps and 10G, Xtramus provides standalone MCM products for different applications and can be applied according to your ideal network topology.
Xtramus' MCM series provide various interfaces such as UTP, SFP, SFP+, XFP and CX4. All these interfaces are developed to support the protocols such as 100Base-Tx, 100Base-Fx, 1000Base-T, 1000Base-X, 10GBase-T, 10GBase-LR, 10GBase-SR and 10GBase-CX4, thus making your network more complete and solid.
Equipped 2 ports with 10G SFP+ interface, MCM-8S22A supports either common fiber optical transceiver or 10G/5G/2.5G/1G electrical port with the specific 4-rate SFP+ to RJ45 transceiver.
All MCM series are equipped with real-time LEDs which display the status of each port, thus allowing users to view network status easily.
MCM series provide an easy-to-access Management Webpage, allowing users to view system status, counters, and network statistics.
Also, MCM series support MIB Counter Report including counters such as Packet, Byte, Broadcast packet, Pause Frame, Length: 64 Bytes, Length: 65-127 Bytes, Length: 128-255 Bytes, Length: 256-511 Bytes, Length: 512-1023 Bytes, Length: 1024-1518 Bytes, Unicast packet, Multicast packet, CRC Error, IP Checksum Error, Under Size Packet, and Over Size Packet.
Furthermore, MCM-8S22A has new mechanism design, it’s more convenient to replace the cooling fan, so MCM-8S22A became easier to maintain.
· 4-rate(10G/5G/2.5G/1G) switchable with the 4-rate SFP+ to RJ45 transceiver
· Supports 3R (Re-generation,Re-timing, Re-shaping) Performance for extending network cable coverage
· Supports Jumbo Frame
· Supports D/D (Digital Detection)functioned optical transceivers and overload protection
· Supports easy-to-use Management Webpage that allows users to view system status,counters, and network statistics
· Supports SNMP (Simple NetworkManagement Protocol)
· Supports Link Loss Forwarding
· Supports DDMI (Digital Diagnostics Monitoring Interface), allowing users to view status such as Temperature,Supply Voltage, Tx Bias Current, Tx Power (dBm), and Rx Power (dBm).
Interface Ports | |||
Port A & Port B | 10G SFP+ Port (10GBase-LR & 10GBase-SR) or 10G/5G/2.5G/1G RJ45 Port (with specific SFP+ to RJ45 transceiver) | ||
Transfer Rate | 10G | ||
Jumbo Frame | 9KB | ||
System Control | |||
System Control | ØTransceiver Power ON/OFF | ØLink Connection Mode: Slave/Segment | |
ØSelectable Auto/Force Media Type | ØLoopback | ||
ØSystem Upgrade (F/W, FPGA) | |||
Device Status Report | |||
Status Report | ØInformation | ØModule Detection | |
ØLink Status | ØFiber Module Detection | ||
ØTemperature Detection | ØTransceiver Overloading | ||
MIB Counter Report * | |||
Counter Report | ØPacket | ØByte | |
ØBroadcast packet | ØPause Frame | ||
ØLength: 64 Bytes | ØLength: 65-127 Bytes | ||
ØLength: 128-255 Bytes | ØLength: 256-511 Bytes | ||
ØLength: 512-1023 Bytes | ØLength: 1024-1518 Bytes | ||
ØUnicast packet | ØMulticast packet | ||
ØCRC Error | ØIP Checksum Error | ||
ØUnder size packet | ØOver size packet | ||
Hardware | |||
Power Source | External Power Adapter * 1 | ||
ØInput: AC 100 V ~ 240 V, 50 Hz ~ 60 Hz | ØOutput: DC 12 V | ||
Power Consumption | 15W (without fiber module) | ||
Dimension | 147 mm x 89 mm x 28 mm | ||
Weight | Approx. 400g | ||
Temperature | ØOperating: 0oC ~ 40oC (32oF ~ 104oF) | ØStorage: 0oC ~ 50oC (32oF ~ 122oF) | |
Humidity (non-condensing) | ØOperating: 0% ~ 85% RH | ØStorage: 0% ~ 85% RH | |